AGA Patiententransportliege H-EKG 1080/Y 980LRZ als Produktvariante mit Zubehör

Patient transport tables with hydraulic height adjustment

The user- and patient-friendly transport tables with hydraulic height adjustment that are always ready for use.

Patient transport table with hydraulic height adjustment, independent of the power supply

On the previous pages, we presented patient transport tables from AGA Sanitätsartikel which have a fixed height.

However, patient transport tables with height adjustment are essential:

  • To make it easier for patients to get on and off,
  • To help users, for example, when transferring patients from operating tables or treatment tables to patient transport tables with different heights,
  • To simplify the handling and maneuvering.


The height adjustment via hydraulics, operated by a foot pump, has the advantage that it is independent of the power supply. It can therefore be used anywhere and at any time. The hydraulic height-adjustable patient transport tables are available in six variants with lacquered and chrome-plated frames as well as upholstery widths of 650 mm, 800 mm and 1,000 mm.

The mobile base is equipped with four large double swivel castors and a central locking system. These make it easier to drive over indoor obstacles such as door thresholds. Since all four castors are connected to each other by rods, they can be released or locked in place with just one step. For easy accessibility, there is a foot pedal at the head and foot ends of the patient transport table. Coloured markings (green = stretcher can be moved, red = stretcher is locked) on the pedals make positioning easier.

AGA Patiententransportliege H-U 1065/Y 980LRZ
Patient transport table with hydraulic height adjustment,
Article No.: H-U 1065/Y 980LRZ

Features

These mobile transport tables are based on our hydraulic height-adjustable examination tables, which are equipped with castors with a central locking system.

  • They are available in three widths:
    • Width 650 mm, Article No.: H-U 1065/Y 980LRZ and H-U 2065/Y 980LRZ,
    • Width 800 mm, Article No.: H-EKG 1080/Y 980LRZ and H-EKG 2080/Y 980LRZ,
    • Width 1,000 mm, Article No.: H-GYMK 10100/Y 980LRZ and H-GYMK 20100/Y 980LRZ.
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The wide base frame ensures a high stability.
  • The upholstery frames of the patient transport tables are made of blank steel:
    • Lacquered, Article No.: H-U 1065/Y 980LRZ, H-EKG 1080/Y 980LRZ and H-GYMK 10100/Y 980LRZ,
    • Chrome-plated, Article No.: H-U 2065/Y 980LRZ, H-EKG 2080/Y 980LRZ and H-GYMK 20100/Y 980LRZ.
  • The upholstery thickness for both tabletop sections (headrest and main surface) is 64 mm.
  • The hydraulic height adjustment (500 - 980 mm) is operated by the built-in foot pump and can be carried out even with heavier patients (up to 200 kg) without much effort. The foot pump can be mounted on either sides (please specify the desired side when placing the order). A second foot pump is available for an additional charge (Article No.: FPH-10).
  • The headrest is continuously adjustable up to +40° and secured with clamping rod locking mechanism.
  • The patient transport tables are equipped with double castors, Ø 125 mm, with a central locking system. The four swivel castors are connected to each other by rods, with foot pedals to lock in position or release located at the head and foot ends of the table.

Technical data

 Table width 650 mm
Article numberH-U 1065/Y 980LRZH-U 2065/Y 980LRZ
FrameLacqueredChrome

Length
Headrest / main section

1,900 mm
500 / 1,400 mm
Width650 mm

Headrest adjustment

500 - 980 mm (hydraulic)

Upholstery segments

2 sections

Upholstery thickness

64 mm

Headrest adjustment

+40° (clamping rods)

Load capacity

200 kg
Castors

Ø 125 mm, double castors with central locking system

 Table width 800 mm

Article number

H-EKG 1080/Y 980LRZH-EKG 2080/Y 980LRZ
FrameLacqueredChrome

Length
Headrest / Main section

1,900 mm
500 / 1,400 mm
Width800 mm

Height adjustment

500 - 980 mm (hydraulic)

Upholstery segments

2 sections

Upholstery thickness

64 mm

Headrest adjustment

+40° (clamping rods)

Load capacity

200 kg

Castors

Ø 125 mm,  double castors with central locking system

In the above tables, the term 'frame' only defines the nature of the upholstery/tabletop frame. The height adjustment mechanism and the base frame are only available in a lacquered version.

The standard configuration includes:
  • Mobility in the form of a central locking system, double swivel castors Ø 125 mm, all four castors offer excellent rolling properties and are connected to each other by rods, foot pedals are arranged diagonally at the head and foot end, easy to operate and with coloured markings (green = table ready for moving, red = table locked in place).
Important:
  • Please note that the patient transport tables described on this page are not suitable for magnetic resonance (MRI). Please see our MRI products instead.
  • On other pages we present hydraulic examination tables without scissor adjustment mechanisms (650 - 850 mm) and for heavier patients (up to 300 kg).

We offer the coloured lacquer coating of the frames as standard in the following three shades (see frame colour selection card):

  • light grey (RAL 7035)
  • white aluminum (RAL 9006)
  • pure white (RAL 9010).

The high quality finish has a glossy look. It is disinfectant resistant and easy to clean.

Other colours are of course also available. Please let us know the desired RAL colour so that we can find out the corresponding additional costs. Please note, however, that these products are then considered type variants with no right of return. 

The artificial leather covers we use are characterized by their tear resistance, durability, longevity and their good cleaning properties as well as their resistance to disinfectants.

We use a (colour) selection from the synthetic leather covers VOWAled Pisa (Vowalon). The colour selection card can be found here.

In addition, we offer you the service of manufacturing the upholstery in other colours or from other synthetic leather manufacturers (type variant). After prior agreement, please send us the relevant references.

The black electrically conductive synthetic leather cover (with equipotential bonding socket on the frame) is available at an additional cost. It is already included in the price of the operating tables and multifunction tables.

Image gallery

The photos show the hydraulic height-adjustable patient transport table, Article No.: H-U 1065/Y 980LRZ, in the colours:

  • Frame: light grey RAL 7035,
  • Upholstery: blue.

Accessories & additional options

Article No.

Description
FPH-10Foot pedal with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.
INF-1720/VA Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order).Retrofitting is only possible to a limited extent.

KVG

Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), release button located directly on the headboard cushion. Retrofitting is not possible.

P-2065/A
P-2080/A

Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.

Chrome-plated, consisting of two mounting kits, two brackets and a paper roll holder bar (length 615 / 795 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.

SL-AWLShock position/Trendelenburg adjustment, approx. 11°, the upholstery frame at the foot end is equipped with a gas pressure spring, release button embedded in the upholstery frame. Retrofitting is not possible.

The accessory components mentioned above are just a small excerpt. The following accessories are also available: surgical standard rails in various lengths, push handles, all-around edge/impact protection, wall deflector rings in the four corners of the table, patient belts, positioning aids, face cutout in the upholstered headrest and padded insert for closing.

More accessories

Product variants

As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.

The photos show the hydraulic height-adjustable patient transport table, Article No.: H-EKG 1080/Y 980LRZ, in the colours:

  • Frame: light grey RAL 7035,
  • Upholstery: grey

as well as the additional accessories and equipment components:

  • Head section adjustment via gas pressure spring, Article No.: KVG.

Questions? Contact us today!

Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.

CONTACT AGA

Product videos

Illustration and operation of the hydraulic height adjustment on the MRI patient transport table, Article No.: H-AWL 3065/Y 980VA, equipped with infusion stand, Article No.: INF-1720/VA, and paper roll holder, Article No.: P-3050/A, as well as the handling of the side guard using the rotating mechanism and the manoeuvrability of the table.

Echocardiography table EKA-1065/AAExternal Video (youtube)

Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.

More products to discover