AWL-3065-VA

MRI Tables with side guards

The MRI tables for safer patient transport.

MRI Patient transport tables up to 7 Tesla - with side guards for safer patient transport

The MRI tables with side guards from AGA Sanitätsartikel were specially designed for use in magnetic resonance (abbreviated MR or MRI). The frame components are made of slightly magnetic stainless steel or aluminium and brass. The low level of residual magnetism does not affect the imaging process, nor are the MRI patient transport tables attracted by the magnetic field of the MR system. It can be used on MR systems up to 7 Tesla without any problems.

The two side guards included in the scope of delivery serve as fall protection and for safer patient transport.

These MRI patient transport tables can be used safely under the following conditions:

  • Static magnetic field of 7 Tesla or less,
  • With an additional spatial gradient of maximum 7 T/m or less,
  • The table must not exceed the limit line of 7 T/m with the head end/foot end in the direction of movement towards the magnet.
AWL-3065-VA, INF-1720/VA
MRI patient transport table, Article No.: AWL-3065/VA, with infusion stand, Article No.: INF-1720/VA

Features

  • The MRI patient transport couches are equipped with swivel castors, Ø 100 mm. All four can be totally locked in turning and running directions.
  • The MRI tables are available in two upholstery widths:
    • Width 650 mm, Article No.: AWL-3065/VA,
    • Width 800 mm, Article No.: AWL-3080/VA.
  • Two side guards are supplied with these MRI tables for safer patient transport.
  • The side guards, dimensions approx. 800 x 250 mm (L x H), can be lowered to the upholstery height using a pivot mechanism and secured using spring-loaded handwheels with fixing bolts.
  • Please take into account the complete table widths including the side guards:
    • The MRI table, Article No.: AWL-3065/VA, is 795 mm wide,
    • The MRI table, Article No.: AWL-3080/VA, is 975 mm wide.
  • The stability and robustness is achieved by the gusset plates in the frame corners and the cross and longitudinal braces between the legs.
  • The tubular steel frame of the MRI tables is made of stainless steel. It has a low residual magnetism.
  • It can be used with a static magnetic field of a maximum of 7 Tesla or less.
  • The thicknesses of the two upholstered segments (headrest and main surface) are each 64 mm.
  • If no height is specified when the order is placed, the MRI patient transport tables will be delivered with a height of 650 mm (also available in heights of 700, 750 and 800 mm at no extra charge).
  • The adjustment of the head section is continuously variable up to +40°. It is locked in place with a clamping handle using a clamping rod mechanism.

Technical data

 MRI tables with side guards
Article numberAWL-3065/VAAWL-3080/VA
FrameStainless steel
Length
Headrest / main section		1,900 mm
500 / 1,400 mm
Width650 mm
(795 mm with side guards)		800 mm
(975 mm with side guards)
Side guards800 x 250 mm (L x H), pivoting
Heights (no extra charge)650 / 700 / 750 / 800 mm
Upholstery segments2 sections
Upholstery thickness64 mm
Headrest adjustment+40° (clamping rods)
Load capacity200 kg
CastorsØ 100 mm, all 4 with locking function
The standard configuration includes:
  • A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.
  • Two side guards, dimensions 800 x 250 mm (L x H). So that these MRI patient transport tables can also be used from both sides, the side guards can be adjusted, pointing upwards or downwards, with a simple pivot mechanism and fixed with spring-loaded handwheels.

The synthetic leathers we use are characterised by their tear resistance, durability, longevity and good cleaning properties as well as their resistance to disinfectants. 

We use a (colour) selection of synthetic leather covers from VOWAled Pisa (Vowalon). You can find the colour selection card here.

Synthetic leather covers (e.g. Skai and Stamskin Top) from other manufacturers can also be used. Please let us know the desired manufacturer, the collection and the exact colour number. We will tell you the corresponding additional costs. Would you like to procure the cover yourself and make it available to us? No problem. We will let you know the required quantity in advance. Please bear in mind that products with third-party covers are type variants and therefore cannot be returned.

Image galleries

The photos show the MRI patient transport table with side guards, Article No.: AWL-3065/VA, in the colours:

  • Frame: stainless steel,
  • Upholstery: turquoise.

The photos show the MRI patient transport table with side guards, Article No.: AWL-3080/VA, in the colours:

  • Frame: stainless steel,
  • Upholstery: red.

Accessories & additional options

Article No.

Description
INF-1720/VA

Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.

P-3050
P-3070		Paper roll holder bar, for table width 650 mm.
Paper roll holder bar, for table width 800 mm.
Made of CrNi steel, Ø 8 mm, length of the paper roll holder bar 515 / 690 mm. For mounting at the foot end of the MRI table, between the table legs. Retrofitting is not possible.

PG-220
PG-260

Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables.
Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables.
Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.

ULKRS-4022All-around edge protection/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible.

More accessories

Product variants

As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.

The photos show the MRI patient transport table with side rails, Article No.: AWL-3065/VA, in the colours:

  • Frame: stainless steel,
  • Upholstery: grey

as well as the additional accessories and equipment components:

  • Paper roll holder bar, Article No.: P-3050,
  • All-around impact protection/edge protection, Article No.: ULKRS-4022.

The photos show the MRI patient transport table with side guards, Article No.: AWL-3080/VA, table height 800 mm, in the colours:

  • Frame: stainless steel,
  • Upholstery: synthetic leather upholstery provided by the customer

as well as the other accessories and equipment components:

  • Paper roll holder bar, Article No.: P-3070,
  • Infusion stand, Article No.: INF-1720/VA.

Questions? Contact us today!

Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.

CONTACT AGA

Product videos

Echocardiography table EKA-1065/AAExternal Video (youtube)

Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.

Side guard SG-3000/1External Video (youtube)

Handling of the pivot mechanism on the side guard, Article No.: SG-3000/1, seen on the MRI patient transport table, Article No.: H-AWL 3065/Y 980VA.

More products to discover