AGA Patiententransportliege PTL-1070/LRZ als Produktvariante mit Zubehör

Patient transport table with all-around edge protection/impact protection and push handles

The special patient transport and recovery table.

Patient transport table with two side guards, all-around edge protection/impact protection and push handles

Ease of use and functionality were the top priority when developing this patient transport table/recovery table from AGA Sanitätsartikel. All functionalities are found within the all-around edge protection/impact protection. This means that not only the patient stretcher itself, but also all walls and doors are protected.

The large double castors make it easier to get over indoor obstacles, for example over door thresholds or power cables. All four double castors (Ø 125 mm) are connected by rods and operated via a central locking system. A foot pedal to secure/release is located at the head and foot ends of the table.

The patient transport table is equipped with two chrome-plated push handles to make steering and moving easier. The undersides of the side guards are padded and covered with synthetic leather, to offer the patient a comfortable feeling when getting on or off.

AGA Patiententransportliege PTL-1070/LRZ mit Zubehör
Patient transport table, Article No.: PTL-1070/LRZ,
with storage basket, Article No.: Korb

Features

  • The patient transport table is equipped with four double castors, Ø 125 mm, which are connected to each other by rods, with a central locking system. The corresponding foot pedals are arranged diagonally at the head and foot ends.
  • For safer patient transport, the table comes with two side guards, dimensions approx. 760 x 230 mm (L x H), which can be lowered to upholstery height using a pivot mechanism and fixed using sliding bolts.
  • If the two side guards point downwards, the complete upolstery width increases (from 600) to 700 mm.
  • The stability and robustness is achieved by transverse and longitudinal struts between the table legs.
  • The tubular steel frame of the patient transport table is made of lacquered blank steel.
  • The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
  • The headrest can be continuously adjusted up to +30° using a gas pressure spring. It can be operated and locked in place with just one hand. The release button is located directly on the headrest.
  • Holders for the optionally available infusion stand (Ø 18 mm) are located on the left and right at the head end.
  • Upholstered frame and side guards with all-around edge/ram protection, black, dimensions 40 x 22 mm.
  • Chrome-plated push handles at the head end and foot end, Ø 30 x 2 mm.

Technical data

 Patient transport table

Article number

PTL-1070/LRZ
FrameLacquered

Length 
Headrest / main section

1,910 mm (overall length 1,950 mm)
560 / 1,330 mm

Width

700 mm (overall width 750 mm)
Height650 mm

Upholstery segments

2 sections

Upholstery thickness

64 mm

Headrest adjustment

+30° (gas pressure spring)

Load capacity

200 kg

Castors

Ø 125 mm, double castors with central locking system

Side guards

760 x 230 mm (L x H), pivoting
Push handlesØ 30 x 2 mm, at foot and head ends
The standard configuration includes:
  • Mibile base in the form of a central locking system, double swivel castors Ø 125 mm, all four castors with excellent rolling properties and connected to each other by rods, foot pedals arranged diagonally at the head and foot end, easy to operate and with coloured markings (green = table ready for moving, red = table locked in place).
  • Two side guards, dimensions 760 x 230 mm (L x H). So that this patient transport table can be used from both sides, the side guards, pointing upwards or downwards, can be adjusted with a simple pivot mechanism and fixed with sliding bolts.
  • Chrome-plated push handles at the head and foot ends.
  • All-around edge/impact protection on the upholstery frame and side guards.
  • Fastening clamps on the side of the head end for the optionally available infusion stand.

We offer the coloured lacquer coating of the frames as standard in the following three shades (see frame colour selection card):

  • light grey (RAL 7035)
  • white aluminum (RAL 9006)
  • pure white (RAL 9010).

The high quality finish has a glossy look. It is disinfectant resistant and easy to clean.

Other colours are of course also available. Please let us know the desired RAL colour so that we can find out the corresponding additional costs. Please note, however, that these products are then considered type variants with no right of return. 

The artificial leather covers we use are characterized by their tear resistance, durability, longevity and their good cleaning properties as well as their resistance to disinfectants.

We use a (colour) selection from the synthetic leather covers VOWAled Pisa (Vowalon). The colour selection card can be found here.

In addition, we offer you the service of manufacturing the upholstery in other colours or from other synthetic leather manufacturers (type variant). After prior agreement, please send us the relevant references.

The black electrically conductive synthetic leather cover (with equipotential bonding socket on the frame) is available at an additional cost. It is already included in the price of the operating tables and multifunction tables.

Image gallery

The photos show the patient transport table, Article No.: PTL-1070/LRZ, in the colours:

  • Frame: light grey RAL 7035,
  • Upholstery: mandarin

as well as the additional accessories and equipment components:

  • Infusion stand, made of stainless steel, with a bottle cross (four hooks), Article No.: INF-30170,
  • Storage basket, Article No.: Korb.

 

Accessories & additional options

Article No.

Description
INF-30170Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm.
KorbStorage basket, plastic-coated (light grey RAL 7035), for hanging, can be pulled out to both sides of the table, dimensions 550 x 290 x 190 mm (W x D x H). Retrofitting is not possible.
P-3059/PTLPaper roll holder, Ø 8 mm, length 590 mm, mounted on the leg frame of the table. Retrofitting is not possible.

The accessory components mentioned above are just a small excerpt. The following accessories are also available: wall deflector rings in the four corners of the table, positioning aids, headrest adjustment via gas pressure spring, face cutout in the upholstered headrest and padded insert for closing.

More accessories

Product variants

As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.

The photos show the patient transport table, Article No.: PTL-1070/LRZ, with an upholstery thickness of 85 mm, in the colours:

  • Frame: light grey RAL 7035,
  • Upholstery: baltic

as well as the other accessories and equipment components:

  • Paper roll holder, Article No.: P-3059/PTL,
  • Storage basket, Article No.: Korb.

The photos show the patient transport table, Article No.: PTL-1070/LRZ, with a complete table width of 650 mm, table height 700 mm and a push handle located only at the head end, in the colours:

  • Frame: light grey RAL 7035,
  • Upholstery: magenta.

Questions? Contact us today!

Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.

CONTACT AGA

Product videos

Examination table H-U 1065/YExternal Video (youtube)

Headrest adjustment by gas pressure spring for the examination table, Article No.: H-U 1065/Y, which is equipped with gas pressure spring, Article No.: KVG.

Side guard SG-3000/1External Video (youtube)

Handling of the pivot mechanism on the side guard, Article No.: SG-3000/1, seen on the MRI patient transport table, Article No.: H-AWL 3065/Y 980VA.

More products to discover