![[Translate to Englisch:]](/fileadmin/_processed_/9/a/csm_AGA-2024-Team-Header-1_246df9da93.png "[Translate to Englisch:]")
AGA-OP-POWER-MAT-GYN
Gynaecology operating tables
The AGA-OP-POWER-MAT-GYN operating tables have been further developed for use in gynaecology.
AGA-OP-POWER-MAT-GYN Gynaecology operating tables
The gynaecology operating table AGA-OP-POWER-MAT-GYN is also available in two frame finishes. The operating table, Article No.: MP-1050/5YGYN, has a coated frame and a base cover made of plastic, while the operating table, Article No.: MP-3050/5YGYN, has a frame and a base cover made of glass bead blasted stainless steel.
The gynaecology operating tables AGA-OP-POWER-MAT-GYN, for example Article No.: MP-1050/5YGYN, are composed of the operating table AGA-OP-POWER-MAT, Article No.: MP-1050/5Y, with the additional equipment components included in the accessories:
- Separate, removable and spreadable leg plates, Article No.: MP-BTSA,
- Upholstery segments as flat pads with x-ray transparent support plates, Article No.: MP-PAL,
- A cutout in the pelvic section.
Additional accessory components, such as leg holders with fastening clamps and a stainless steel discharge pan, turn the operating table into almost a full-fledged gynaecological examination chair.
Features
- All upholstery segments can be continuously adjusted manually using gas pressure springs (back, seat and leg sections) or clamping rod mechanism (head section). This type of construction results in an extremely competitive price.
- Maintenance-free hydraulic height adjustment from 785 to 1,085 mm using a foot pump. This type of construction makes the AGA-OP-POWER-MAT-GYN independent of an energy source.
- Table surface divided into five sections for optimal and safe patient positioning.
- Upholstery segments as flat pads, thickness 40 mm, colour black, antistatic according to ISO 2882, with seamless top sides. They are attached to the hook straps with fleece straps, which are located on the 15 mm thick x-ray compatible support plates.
- The base, which is equipped with a potential equalization socket and levelling feet, offers high stability.
- Lifting column made of anodized light metal.
- A pelvic cutout is incorporated into the seat section.
- Leg plates in a split, removable and spreadable design (instead of just being foldable by 90°).
- Standard surgical rails (25 x 10 mm) on the outside of the frame of the back, seat and leg sections, for attaching accessory components such as armrests, anesthesia pole, leg holders, etc.
Technical data
| AGA-OP-POWER-MAT-GYN | ||
|---|---|---|
| Article number | MP-1050/5YGYN | MP-3050/5YGYN |
| Frame | Lacquered | Stainless steel |
| Lengths Head to foot sections | 1,900 mm 295 / 575 / 360 / 520 mm | |
| Width | 500 mm (560 mm with standard rails) | |
| Height adjustment | 785 - 1,085 mm (hydraulic) | |
| Upholstery segments | 5 sections | |
| Synthetic leather | Electrically conductive, black | |
| Upholstery thickness | 40 mm | |
| Load capacity | 150 kg | |
| Separate, removable and spreadable leg plates | ✓ | |
| Upholsery segments as flat pads with X-ray transparent support plates | ✓ | |
| Gyn. cutout | ✓ | |
| Trendelenburg adjustment Anti-Trendelenburg adjustment | 20° 8° | |
| Headrest adjustment | -30°/+20° (clamping rods) | |
| Back section adjustment | -20°/+45° (gas pressure spring) | |
| Seat section adjustment | -10°/+40° (gas pressure spring) | |
| Leg plates adjustment | -90°/0° (separate, gas pressure springs) | |
The standard configuration includes:
- Standard surgical rails on the outside of the frame of the back, seat and leg sections, dimensions 25 x 10 mm, made of stainless steel, for attaching accessory components such as armrests, anesthesia sheets, leg holders, etc.
- A base equipped with a potential equalization socket and levelling feet.
We offer the coloured lacquer coating of the frames as standard in the following three shades (see frame colour selection card):
- light grey (RAL 7035)
- white aluminum (RAL 9006)
- pure white (RAL 9010).
The high quality finish has a glossy look. It is disinfectant resistant and easy to clean.
Other colours are of course also available. Please let us know the desired RAL colour so that we can find out the corresponding additional costs. Please note, however, that these products are then considered type variants with no right of return.
The electrically conductive upholstery we use is especially suitable for medical use and is available in the colour black. This cover has a conductive polyurethane transfer coating with improved electrical conductivity on knitted polyamide fabric (38% PU, 62% PA).
It is characterised by its tear resistance, durability, longevity and good cleaning properties as well as its resistance to disinfectants.
Information on cleaning and caring for the electrically conductive cover can be found here.
Downloads
Image galleries
MP-1050/5YGYN, LR/Z-50, PU-2049, MP-RF, VA/30-MP
MP-1050/5YGYN, LR/Z-50, PU-2049, MP-RF, VA/30-MP
MP-1050/5YGYN, LR/Z-50, PU-2049, MP-RF, VA/30-MP
The photos show the hydraulic height-adjustable operating table AGA-OP-POWER-MAT-GYN, Article No.: MP-1050/5YGYN, in the colours:
- Frame: pure white RAL 9010,
- Upholstery: black, electrically conductive
as well as the additional accessories and equipment components:
- Central locking castor system, Article No.: LR/Z-50,
- Paper roll holder, Article No.: PU-2049,
- Compartment for X-ray cassettes under the pelvic section, Article No.: MP-RF,
- Stainless steel bowl with holder, Article No.: VA-30/MP.
MP-1050/5YGYN, LR/Z-50, PU-2049, MP-RF, VA-30/MP, BHG-600, BKG-600, RL-2060/BK
The photo shows the hydraulic height-adjustable operating table AGA-OP-POWER-MAT-GYN, Article No.: MP-1050/5YGYN, in the colours:
- Frame: pure white RAL 9010,
- Upholstery: black, electrically conductive
as well as the additional accessories and equipment components:
- Central locking castor system, Article No.: LR/Z-50,
- Paper roll holder, Article No.: PU-2049,
- Compartment for X-ray cassettes under the pelvic section, Article No.: MP-RF,
- Stainless steel bowl with holder, Article No.: VA-30/MP,
- Pair of Göpel leg rests, Article No.: BHG-600,
- Pair of Göpel fastening clamps, Article No.: BKG-600,
- Pair of ring armrests, Article No.: RL-2060/BK.
Accessories & additional options
To attach additional equipment components (accessories), equipment rails (dimensions 25 x 10 mm, made of CrNi steel), also known as standard surgical rails, are found on the outside of the frame of the back, seat and leg sections.
Article No. | Description |
|---|---|
| A-2047 | Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail. |
| AHT-3065 | Arm and hand surgery table, made of CrNi steel, height adjustable approx. 700 - 1,135 mm, with floor support, black conductive upholstery, dimensions approx. 650 x 250 mm (L x W), with fastening clamp for standard rail. |
| BEFE-60 | Leg restraints (pair), with Velcro fastenings around the leg section(s) of the table, fixation of the legs using straps with Velcro closures. |
| BHG-600 | Göpel leg rests (pair), with spherical joints, rods with two 90° bends, chrome-plated, Ø 18 mm, black PU-foam shells. A pair of fastening clamps for standard rails is required. |
| BKG-600 | Göpel fastening clamps (pair), adjustable, chrome-plated, for standard rails. |
| IT-3060 | Instrument table, made of CrNi steel, dimensions approx. 600 x 400 mm (L x W), side raised edge 15 mm, mounting rod Ø 18 mm. A fastening clamp for standard rails is required. |
| NB-30640 | Anesthesia pole, made of CrNi steel, pole length 640 mm, Ø 18 mm. A fastening clamp for standard rail required. |
| SG-1000/BK | Side guard, removable, dimensions approx. 800 x 250 mm (L x H), with fastening clamp for standard rail. |
The equipment components mentioned above are just a small excerpt. The following accessories are also available for the operating tables: hand restraints, ring armrests, body belt, side or shoulder holder, side support, IV stand and leg holders.
Product variants
As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.
It is possible to outfit the operating table, for example, with a leg section in one piece. We will be pleased to provide further information on the price adjustment (discount) upon request.
Questions? Contact us today!
Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.
Product videos
Illustration and operation of the hydraulic height adjustment on the MRI patient transport table, Article No.: H-AWL 3065/Y 980VA, equipped with infusion stand, Article No.: INF-1720/VA, and paper roll holder, Article No.: P-3050/A, as well as the handling of the side guard using the rotating mechanism and the manoeuvrability of the table.
Illustration of the standard surgical rails, Article No.: OPS-170/A.
Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.