![[Translate to Englisch:]](/fileadmin/_processed_/9/a/csm_AGA-2024-Team-Header-1_246df9da93.png "[Translate to Englisch:]")
AGA-POWER-MAT-GYN
Gynaecology multi-function tables
The multi-function tables AGA-POWER-MAT-GYN have been further developed for use in gynaecology.
AGA-POWER-MAT-GYN Gynaecology multi-function tables
The gynaecology multi-function table AGA-POWER-MAT-GYN is also available in two frame finishes. The multi-function table, Article No.: MP-1050/5EGYN, has a coated frame and a base cover made of plastic, while the multi-function table, Article No.: MP-3050/5EGYN, has a frame and a base cover made of glass bead blasted stainless steel.
The gynaecology multi-function table AGA-POWER-MAT-GYN, for example Article No.: MP-1050/5EGYN, is composed of the
- Multi-function table AGA-POWER-MAT, Article No.: MP-1050/5E, with the additional equipment components included in the accessories:
- Separate, removable and spreadable leg plates, Article No.: MP-BTSA,
- Upholstery segments as flat pads with x-ray transparent support plates, Article No.: MP-PAL, and
- A cutout in the pelvic section.
Additional accessory components, such as leg holders with fastening clamps and a stainless steel discharge pan, turn the multi-function table into almost a complete gynaecological examination chair.
Features
- All upholstery segments can be continuously adjusted manually using gas pressure springs (back, seat and leg sections) or clamping rod mechanism (head section). This type of construction results in an extremely competitive price.
- Electric motorized height adjustment from 800 to 1,100 mm, control of the anodized lifting column as standard via a hand switch (foot switch for an additional charge).
- Motor connection values: 230V, 50/60Hz, 2.5A, 150W, IP30, v=9mm/s, 3,000N.
- Table surface divided into five sections for optimal and safe patient positioning.
- Upholstery segments as upholstery pads, thickness 40 mm, colour black, antistatic according to ISO 2882, with seamless top sides. They are attached to the hook straps with fleece straps, which are located on the 15 mm thick X-ray compatible support plates.
- The base, which is equipped with a potential equalization socket and levelling feet, offers high stability.
- A pelvic cutout is incorporated into the seat part.
- Leg plates in a split, removable and spreadable design (instead of just being foldable by 90°).
- Standard surgical rails (25 x 10 mm) on the outside of the frame of the back, seat and leg sections, for attaching accessory components such as armrests, anesthesia pole, leg holders, etc.
Technical data
| AGA-POWER-MAT-GYN | ||
|---|---|---|
| Article number | MP-1050/5EGYN | MP-3050/5EGYN |
| Frame | Lacquered | Stainless steel |
| Lengths Head to foot sections | 1,900 mm 295 / 575 / 360 / 520 mm | |
| Width | 500 mm (560 mm with standard rails) | |
| Height adjustment | 800 - 1,100 mm (electric motor) | |
| Upholstery segments | 5 sections | |
| Synthetic leather | Electrically conductive, black | |
| Upholstery thickness | 40 mm | |
| Load capacity | 150 kg | |
| Separate, removable and spreadable leg plates | ✓ | |
| Upholsery segments as flat pads with X-ray transparent support plates | ✓ | |
| Gyn. cutout | ✓ | |
| Trendelenburg adjustment Anti-Trendelenburg adjustment | 20° 8° | |
| Headrest adjustment | -30°/+20° (clamping rods) | |
| Back section adjustment | -20°/+45° (gas pressure spring) | |
| Seat section adjustment | -10°/+40° (gas pressure spring) | |
| Leg plates adjustment | -90°/0° (separate, gas pressure springs) | |
The standard configuration includes:
- Standard surgical rails on the outside of the frame of the back, seat and leg sections, dimensions 25 x 10 mm, made of stainless steel, for attaching accessory components such as armrests, anesthesia sheets, leg holders, etc.
- A base equipped with a potential equalization socket and levelling feet.
We offer the coloured lacquer coating of the frames as standard in the following three shades (see frame colour selection card):
- light grey (RAL 7035)
- white aluminum (RAL 9006)
- pure white (RAL 9010).
The high quality finish has a glossy look. It is disinfectant resistant and easy to clean.
Other colours are of course also available. Please let us know the desired RAL colour so that we can find out the corresponding additional costs. Please note, however, that these products are then considered type variants with no right of return.
The electrically conductive upholstery we use is especially suitable for medical use and is available in the colour black. This cover has a conductive polyurethane transfer coating with improved electrical conductivity on knitted polyamide fabric (38% PU, 62% PA).
It is characterised by its tear resistance, durability, longevity and good cleaning properties as well as its resistance to disinfectants.
Information on cleaning and caring for the electrically conductive cover can be found here.
Downloads
Image gallery
MP-3050/5EGYN, LR/Z-50
MP-3050/5EGYN, LR/Z-50, ohne Polster
The photos show the multi-function table AGA-POWER-MAT-GYN, Article No.: MP-3050/5EGYN, in the colours:
- Frame: glass bead blasted stainless steel,
- Upholstery: black, electrically conductive
as well as the additional accessories and equipment components:
- Central locking castor system, Article No.: LR/Z-50,
- Compartment for X-ray cassettes under the pelvic section, Article No.: MP-RF.
Accessories & additional options
To attach additional equipment components (accessories), equipment rails (dimensions 25 x 10 mm, made of CrNi steel), also known as standard surgical rails, are found on the outside of the frame of the back, seat and leg sections.
Article No. | Description |
|---|---|
| A-2047 | Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail. |
| AHT-3065 | Arm and hand surgery table, made of CrNi steel, height adjustable approx. 700 - 1,135 mm, with floor support, black conductive upholstery, dimensions approx. 650 x 250 mm (L x W), with fastening clamp for standard rail. |
| BEFE-60 | Leg restrainst (pair), with Velcro fastenings around the leg section(s) of the table, fixation of the legs using straps with Velcro closures. |
| BHG-600 | Göpel leg rests (pair), with spherical joints, rods with two 90° bends, chrome-plated, Ø 18 mm, black PU-foam shells. A pair of fastening clamps for standard rails is required. |
| BKG-600 | Göpel fastening clamps (pair), adjustable, chrome-plated, for standard rails. |
| IT-3060 | Instrument table, made of CrNi steel, dimensions approx. 600 x 400 mm (L x W), side raised edge 15 mm, mounting rod Ø 18 mm, fastening clamp for standard rail required. |
| NB-30640 | Anesthesia pole, made of CrNi steel, pole length 640 mm, Ø 18 mm, fastening clamp for standard rail required. |
| SG-1000/BK | Side guard, removable, dimensions approx. 800 x 250 mm (L x H), with fastening clamp for standard rail. |
The equipment components mentioned above are just a small excerpt. The following accessories are also available for the multi-function tables: hand restraints, ring armrests, body belt, side or shoulder holder, side support, IV stand and leg holder.
Product variants
As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.
It is possible to outfit the multi-function table, for example, with a leg section in one piece, a narrower headrest or a different coloured synthetic leather cover. We will be pleased to provide further pricing information upon request.
Questions? Contact us today!
Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.
Product videos
Illustration of the electric height adjustment of the examination table, Article No.: H-U 1065/E. The adjustment system has a button lock that is deactivated with a double tap.
Illustration of the standard surgical rails, Article No.: OPS-170/A.
Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.