MRI Tables with hydraulic height adjustment

The user- and patient-friendly MRI transport tables with hydraulic height adjustment.

MRI Patient transport tables up to 7 Tesla - with hydraulic height adjustment for an optimal height

On the previous two pages, we presented MRI tables from AGA Sanitätsartikel with a fixed table height.

However, MRI tables with hydraulic height adjustment are also available. Due to the mobile nature of the MRI stretchers and the associated flexibility of use, a motor drive for height adjustment was omitted. Hydraulics are independent of the power supply and can therefore be operated anywhere and at any time. The hydraulics are operated via a foot pump.

The advantage of these hydraulic height-adjustable MRI patient transport tables is that they are suitable for MR systems with different patient table heights and make it easier for patients to get on and off.

The hydraulic height-adjustable MRI tables can be used safely under the following conditions:

  • Static magnetic field of a maximum of 7 Tesla or less,
  • With an additional spatial gradient of a maximum of 10 T/m or less,
  • The table must not exceed the limit line of 10 T/m with the head end/foot end in the direction of movement towards the magnet.

Features

  • The hydraulic height-adjustable MRI patient transport tables are equipped with castors, Ø 100 mm. All four can be completely locked in rotation and running directions.
  • They are available in two widths:
    • Width 650 mm, Article No.: H-U 3065/Y 980LRVA,
    • Width 800 mm, Article No.: H-EKG 3080/Y 980LRVA.
  • The tubular steel frame of the hydraulic height-adjustable MRI tables is made of stainless steel, with a low residual magnetism.
  • The hydraulic height adjustment is operated using a foot pump. The foot pump can be mounted on both sides (please specify the desired side when placing the order). A second foot pump is also available for a surcharge (Article No.: FPH-30).
  • The height-adjustable MRI tables can be used with a static magnetic field of a maximum of 7 Tesla or less.
  • The thickness of the two upholstered segments (headrest and main surface) is 64 mm.
  • The headrest can be adjusted continuously up to +40°. It is locked using a handle using a clamping rod mechanism.

Technical data

 MRI Patient transport tables
with hydraulic height adjustment
Article numberH-U 3065/Y 980LRVAH-EKG 3080/Y 980LRVA
FrameStainless steel
Length 
Headrest / main section
1,900 mm
500 / 1,400 mm
Width650 mm800 mm
Height adjustment620 - 980 mm (hydraulic)
Upholstery segments2 sections
Upholstery thickness64 mm
Headrest adjustment+40° (clamping rods)
Load capacity200 kg
CastorsØ 100 mm, all 4 with locking function
The standard configuration includes:
  • A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.

The synthetic leathers we use are characterised by their tear resistance, durability, longevity and good cleaning properties as well as their resistance to disinfectants. 

We use a (colour) selection of synthetic leather covers from VOWAled Pisa (Vowalon). You can find the colour selection card here.

Synthetic leather covers (e.g. Skai and Stamskin Top) from other manufacturers can also be used. Please let us know the desired manufacturer, the collection and the exact colour number. We will tell you the corresponding additional costs. Would you like to procure the cover yourself and make it available to us? No problem. We will let you know the required quantity in advance. Please bear in mind that products with third-party covers are type variants and therefore cannot be returned.

Image galleries

The photos show the MRI patient transport table with hydraulic height adjustment, Article No.: H-U 3065/Y 980LRVA, in the colours:

  • Frame: glass bead blasted stainless steel,
  • Upholstery: atoll.

The photos show the MRI patient transport table with hydraulic height adjustment, Article No.: H-EKG 3080/Y 980LRVA, in the colours:

  • Frame: glass bead blasted stainless steel,
  • Upholstery: atoll.

Accessories & additional options

Article No.

Description
FPH-30

Foot pedal, MR-compatible, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.

INF-1720/VA

Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.

P-3050/A
P-3070/A
Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.

With mounting hardware, made of CrNi steel, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm) and a paper roll holder bar (length 515 / 690 mm, Ø 8 mm), for mounting at the foot end of the upholstered frame.

PG-220
PG-260

Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables.
Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables.
Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.
ULKRS-4022All-around edge/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible.

More accessories

Product variants

As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.

Outfitting the hydraulic height-adjustable MRT patient transport tables with all-around edge/impact protection or a different coloured synthetic leather cover is possible at an additional cost. We will be pleased to provide further information upon request.

Questions? Contact us today!

Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.

CONTACT AGA

Product videos

Illustration and operation of the hydraulic height adjustment on the MRI patient transport table, Article No.: H-AWL 3065/Y 980VA, equipped with infusion stand, Article No.: INF-1720/VA, and paper roll holder, Article No.: P-3050/A, as well as the handling of the side guard using the rotating mechanism and the manoeuvrability of the table.

stufenlose Kopfteilverstellung bei einer Echo-Kardiographieliege
Echocardiography table EKA-1065/AAExternal Video (youtube)

Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.

More products to discover