![[Translate to Englisch:]](/fileadmin/_processed_/9/a/csm_AGA-2024-Team-Header-1_246df9da93.png "[Translate to Englisch:]")
MRI Tables
The patient transport tables for MR systems up to 7 Tesla.
MRI Patient transport tables up to 7 Tesla
These MRI tables are used in magnetic resonance imaging (MR or MRI for short). In order to neither influence the imaging process nor be attracted by the magnetic field of the MR system, in addition to safety when transporting patients in magnetic resonance, the material properties of the transport tables are also important.
For example, the MRI tables from AGA Sanitätsartikel are made of slightly magnetic stainless steel or aluminium and brass components. The low residual magnetism allows use on MR systems up to 7 Tesla.
The MRI patient transport tables can be used safely under the following conditions:
- Static magnetic field of 7 Tesla or less,
- With an additional spatial gradient of maximum 7 T/m or less,
- The table must not exceed the limit line of 7 T/m with the head end/foot end in the direction of movement towards the magnet.
Features
- The MRI tables are equipped with swivel castors, Ø 100 mm. All four can be completely locked in rotation and running directions.
- They are available in two widths:
- Width 650 mm, Article No.: U-3065/LRVA,
- Width 800 mm, Article No.: EKG-3080/LRVA.
- The stability and robustness is achieved by the gusset plates in the frame corners as well as the transverse and longitudinal struts between the table legs.
- The tubular steel frame of the MRI tables is made of stainless steel. It has a low residual magnetism.
- It can be used with a static magnetic field of a maximum of 7 Tesla or less.
- The thickness of the two upholstery segments (head section and main surface) are each 64 mm.
- If no height dimension is specified when placing the order, the MRI patient transport tables will be delivered at a height of 650 mm (also available in heights of 700, 750 and 800 mm at no extra charge).
- The headrest can be adjusted continuously up to +40°. It is locked using a clamping handle using a clamping rod mechanism.
Technical data
| MRI Patient transport tables | |||
|---|---|---|---|
| Article number | U-3065/LRVA | EKG-3080/LRVA | |
| Frame | Stainless steel | ||
| Length Headrest / main section | 1,900 mm 500 / 1,400 mm | ||
| Width | 650 mm | 800 mm | |
| Heights (no extra charge) | 650 / 700 / 750 / 800 mm | ||
| Upholstery segments | 2 sections | ||
| Upholstery thickness | 64 mm | ||
| Headrest adjustment | +40° (clamping rods) | ||
| Load capacity | 200 kg | ||
| Castors | Ø 100 mm, all 4 with locking function | ||
The standard configuration includes:
- A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.
The synthetic leathers we use are characterised by their tear resistance, durability, longevity and good cleaning properties as well as their resistance to disinfectants.
We use a (colour) selection of synthetic leather covers from VOWAled Pisa (Vowalon). You can find the colour selection card here.
Synthetic leather covers (e.g. Skai and Stamskin Top) from other manufacturers can also be used. Please let us know the desired manufacturer, the collection and the exact colour number. We will tell you the corresponding additional costs. Would you like to procure the cover yourself and make it available to us? No problem. We will let you know the required quantity in advance. Please bear in mind that products with third-party covers are type variants and therefore cannot be returned.
Downloads
Image galleries
U-3065/LRVA, P-3050
U-3065/LRVA, P-3050
The photos show the MRI patient transport table, Article No.: U-3065/LRVA, in the colours:
- Frame: stainless steel,
- Upholstery: atoll
as well as the additional accessories and equipment components:
- Paper roll holder bar, Article No.: P-3050.
EKG-3080/LRVA, INF-1720/VA
EKG-3080/LRVA, INF-1720/VA
EKG-3080/LRVA, INF-1720/VA
EKG-3080/LRVA, INF-1720/VA
EKG-3080/LRVA, INF-1720/VA
EKG-3080/LRVA, INF-1720/VA
The photos show the MRI patient transport table, Article No.: EKG-3080/LRVA, in the colours:
- Frame: stainless steel,
- Upholstery: blue
as well as the additional accessories and equipment components:
- Infusion holder made of stainless steel, length 1,700 mm, with four hooks and a screw-on fastening clamp, Article No.: INF-1720/VA.
Accessories & additional options
Article No. | Description |
|---|---|
| INF-1720/VA | Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent. |
| P-3050 P-3070 | Paper roll holder bar, for table width 650 mm. Paper roll holder bar, for table width 800 mm. Made of CrNi steel, Ø 8 mm, length of the paper roll holder bar 515 / 690 mm. For mounting at the foot end of the MRI table, between the table legs. Retrofitting is not possible. |
PG-220 | Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables. |
| ULKRS-4022 | All-around edge protection/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible. |
Product variants
As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.
U-3065/LRVA, slots for side safety rails
U-3065/LRVA, slots for side safety rails
The photos show the MRI patient transport table, Article No.: U-3065/LRVA, in the colours:
- Frame: stainless steel,
- Upholstery: turquoise
as well as the other accessories and equipment components:
- Pre-drilled holes for retrofitting side safety rails, holes are sealed with caps.
Questions? Contact us today!
Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.
Product videos
Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.