![[Translate to Englisch:]](/fileadmin/_processed_/9/a/csm_AGA-2024-Team-Header-1_246df9da93.png "[Translate to Englisch:]")
Cardiology tilt tables AGA-KARDIO-MAT and AGA-KARDIO-LIFT, AGA-EKA-MAT and AGA-EKA-LIFT
Phlebology tables as tilt tables for use in cardiology and neurology.
Cardiology tilt tables for the tilt test
The phlebology tables from AGA Sanitätsartikel have been expanded so that they can also be used in cardiology, one of the most important technical non-invasive examination methods of the heart, now an indispensable part of cardiological diagnostics. The tilt tables are equipped as standard with an electric motor for tilt adjustment.
The cardiology tilt tables are available with and without an echo-cutout integrated into the main surface cushion and with and without height adjustment. The four variants are structured as follows:
- Without echo-cutout, with tilt adjustment, AGA-KARDIO-MAT, Article No.: KT-1062/E,
- Without echo-cutout, with tilt adjustment and height adjustment, AGA-KARDIO-LIFT, Article No.: KT-1060/EE,
- With echo-cutout and tilt adjustment, AGA-EKA-MAT, Article No.: EKAT-1062/E,
- With echo-cutout, with tilt adjustment and height adjustment, AGA-EKA-LIFT, Article No.: EKAT-1060/EE.
Features
- If necessary, for example when a patient collapses, the tilt tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
- The stability and robustness is achieved by the gusset plates in the frame corners.
- The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
- The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
- The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
- The tilt tables, Article No.: KT-1062/E and EKAT-1062/E, have a fixed working height (730 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
- The tilt tables, Article No.: KT-1060/EE and EKAT-1060/EE, are equipped with an electromotive height adjustment (730 - 930 mm, measured in the horizontal upholstery position).
- The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
- The headrest can be adjusted continuously up to +40° and locked with a handle, using a clamping rod mechanism.
Technical data
| AGA-KARDIO-MAT | AGA-KARDIO-LIFT | AGA-EKA-MAT | AGA-EKA-LIFT | |
|---|---|---|---|---|
Article number | KT-1062/E | KT-1060/EE | EKAT-1062/E | EKAT-1060/EE |
Frame | Lacquered | |||
Length | 1,900 mm 500 / 1,400 mm | |||
Width | 620 mm (680 mm with standard rails) | |||
Height adjustment | - | 730 - 930 mm (electric motor) | - | 730 - 930 mm (electric motor) |
| Height (fixed) | 730 mm | - | 730 mm | - |
| Echo-cutout | - | 300 x 250 mm (L x W) with upholstered insert | ||
Tilt adjustment | -20º / +74º (electric motor) | |||
Upholstery segments | 2-teilig | 3-teilig | ||
Upholstery thickness | 64 mm | |||
Headrest adjustment | +40º (clamping rods) | |||
Load capacity | 150 kg | |||
The standard configuration includes:
- A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 1,560 mm.
- A pair of black ring armrests, including fastening clamps for standard surgical rails.
- A black footboard, dimensions 490 x 320 mm, thickness 15 mm, with a non-slip surface.
- The foot switch(es).
- A safety support rod that can be pulled out from the floor frame.
- A cutout at the foot of the main section to make it easier to get on and off.
- A floor frame with levelling feet.
- A patient belt sewn from synthetic leather, dimensions 2,200 x 250 mm (LxW), with Velcro fastener.
- The removable upholstered insert, dimensions 300 x 250 mm (L x W), for closing the echo cutout (only for the tilt tables, Article No.: EKAT-1062/E and EKAT-1060/EE).
We offer the coloured lacquer coating of the frames as standard in the following three shades (see frame colour selection card):
- light grey (RAL 7035)
- white aluminum (RAL 9006)
- pure white (RAL 9010).
The high quality finish has a glossy look. It is disinfectant resistant and easy to clean.
Other colours are of course also available. Please let us know the desired RAL colour so that we can find out the corresponding additional costs. Please note, however, that these products are then considered type variants with no right of return.
The artificial leather covers we use are characterized by their tear resistance, durability, longevity and their good cleaning properties as well as their resistance to disinfectants.
We use a (colour) selection from the synthetic leather covers VOWAled Pisa (Vowalon). The colour selection card can be found here.
In addition, we offer you the service of manufacturing the upholstery in other colours or from other synthetic leather manufacturers (type variant). After prior agreement, please send us the relevant references.
The black electrically conductive synthetic leather cover (with equipotential bonding socket on the frame) is available at an additional cost. It is already included in the price of the operating tables and multifunction tables.
Downloads
pdf | 1,006 KB
pdf | 2 MB
Image galleries
KT-1062/E
KT-1062/E
The photos show the cardiology tilt table AGA-KARDIO-MAT, Article No.: KT-1062/E, in the colours:
- Frame: pure white RAL 9010,
- Upholstery: white.
EKAT-1062/E
EKAT-1062/E
EKAT-1062/E
EKAT-1062/E
EKAT-1062/E
EKAT-1062/E
EKAT-1062/E
The photos show the cardiology tilting table AGA-EKA-MAT, Article No.: EKAT-1062/E, in the colours:
- Frame: light grey RAL 7035,
- Upholstery: atoll.
Accessories & additional options
Article No. | Description |
|---|---|
| A-2047 | Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail. |
| KVG | Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headrest cushion. Retrofitting is not possible. |
| LR/Z-50 | Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible. |
P-2065/A | Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame. |
| PEF-1043 | Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours. |
| PG-220 | Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables, Sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours. |
WM-30 | Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible. |
The accessory components mentioned above are just a small excerpt. The following accessories are also available: face cutout in the headrest and upholstered insert for closing it, positioning aids, anesthesia bow, shoulder/side supports, side guards, side supports.
Product variants
As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.
The cardiology tilt tables can, for example, be delivered with a one-piece, continuous tabletop or a different synthetic leather cover colour. We will be pleased to provide further pricing information upon request.
Questions? Contact us today!
Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.
Product videos
Illustration of the electric height adjustment of the AGA-PHLEBO-LIFT phlebology table, Article No.: VEKO-1060/EE, equipped with the protractor, Article No.: WM-30, the central locking castor system, Article No.: LR/Z-50, and the heel rest, Article No.: FR-60, as well as the Trendelenburg adjustment, degree display and the mobility.
Illustration and operation of the continuous headrest adjustment by clamping rod mechanism, Article No.: EKA-1065/AA.
Illustration of the standard surgical rails, Article No.: OPS-170/A.