Accessories for X-ray tables

Battery module
As a replacement, for constant operational readiness, with emergency stop, only for battery-powered X-ray tables.

Infusion holder
Made of CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, round tube Ø 18 mm. Includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.

Set of castors, Ø 75 mm.
Set of castors, Ø 125 mm.
Four swivel castors, two of which are completely lockable.
Please specify the desired total table height with the castors when placing your order.

Central locking castor system, double swivel castors Ø 125 mm.
Mobility in the form of a central locking system, all four castors offer excellent rolling properties and are connected to each other by rods, foot pedals are arranged diagonally at the head and foot end, easy to operate and with coloured markings (green = table ready for moving, red = table locked in place). Retrofitting is not possible. Please specify the desired total table height with the castors when placing your order.

Standard rails (pair), approx. length 400 mm.
Standard rails (pair), approx. length 600 mm.
Standard rails (pair), approx. length 1,000 mm.
Standard rails (pair), approx. length 1,400 mm.
Standard rails (pair), approx. length 1,700 mm.
Made of CrNi steel, dimensions approx. 25 x 10 mm, for mounting on the upholstery frame, approx. 13.5 mm away from the upholstery/upper frame with 2 (or 3) spacers. For holding accessory components and lower body radiation protection curtains. Retrofitting is not possible.

Fixation belt
Length 1,800 mm, width 47 mm, each with two belt locks and mounting brackets for standard rails.

Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.
With mounting hardware, chrome-plated, consisting of two attachment (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two angles, two clamps and a paper roll holder bar (length 645 / 795 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.

Upholstered pad, for 650 mm wide X-ray tables.
Upholstered pad, for 800 mm wide X-ray tables.
To provide patients with a pleasant and comfortable lying position, upholstered pads (length 1,900 mm, thickness 40 mm) are available in 21 upholstery colours (see upholstery colours) for the X-ray tables. They are fixed underneath the tabletop frame with the help of straps and Velcro fasteners.

Side guard, plastic coated.
Side guard, chrome-plated.
Side guard, made of CrNi steel.
Dimensions approx. 800 x 250 mm (L x H), can be inserted into the upholstery/tabletop frame facing upwards or downwards, secured using a handwheel. Retrofitting is not possible.

Side guard, plastic coated.
Side guard, chrome-plated.
Side guard, made of CrNi steel.
Dimensions approx. 800 x 250 mm (L x H), permanently connected to the upholstery/tabletop frame, can be lowered to upholstery height using a pivot mechanism, black handwheel with spring-loaded fixing bolts. Retrofitting is not possible.

Push handle, for table width 650 mm.
Push handle, for table width 800 mm.
Round tube Ø 30 x 2 mm, height 300 mm, chrome-plated, mounted at the foot end of the upholstery/tabletop frame. Retrofitting is not possible.

Push handle, for table width 650 mm.
Push handle, for table width 800 mm.
Round tube Ø 30 x 2 mm, height 440 mm, chrome-plated, mounted at the head end of the upholstery/tabletop frame. Retrofitting is not possible.

All-around edge protection/impact protection
Black, dimensions approx. 40 x 22 mm, with aluminum insert, mounted on the upholstery frame (and on the side guards). Retrofitting is not possible.

Set of wall deflector rings
Rings Ø 100 mm, plastic-coated holders, screwed into the four table corners. Retrofitting is not possible.