Accessories and equipment components for phlebology and tilt tables

Arm support
Swivel-mounted, black PU-foamed arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.

Leg rests (pair)
With plastic shells, rods with a 90° bend, chrome-plated, round Ø 18 mm, with Velcro closures to secure the legs to the shells. A pair of fastening clamps for standard rails is required.

Göpel leg rests (pair)
With spherical joints, rods with two 90° bends, chrome-plated, round Ø 18 mm, black PU-foam supports, includes the straps sewn from synthetic leather with Velcro closure to secure the legs to the shells.  A pair of fastening clamps for standard rails is required.

Göpel fastening clamps (pair)
For leg support poles Ø 18 mm, the leg holders can be adjusted in height and tilt using toothed rings and secured with a clamping mechanism.

Fastening clamps (pair)
For standard rails (dimensions 25 x 10 mm), chrome-plated, holders for Ø 18 mm, the equipment components (e.g. shoulder/side support) can be secured at the desired height with a clamping handle.

Heel rest
Recommended for use in phlebology. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical staff both hands free to bandage the patient's legs. Retrofitting is not possible. Not available for the therapeutic tilt tables.

Face cutout in the headboard cushion.
Oval, dimensions approx. 205 x 105 mm (L x W). Retrofitting is not possible.
Upholstered insert for closing the face opening,
Oval, dimensions approx. 200 x 100 mm (L x W). See upholstery colours. 

Semi-circular roll
Foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.

Semi-circular roll with elastic strap.
Semi-circular roll with Velcro fastener (hook and loop straps).
Foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.

Head wedge
Foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours.

Headrest adjustment via gas pressure spring (instead of clamping rod mechanism).
Can be operated with just one hand, release button located directly on the headrest cushion. Retrofitting is not possible. Not available for the therapeutic tilt tables.

Mobile base with central locking castor system
Welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.

Anesthesia pole
Made of CrNi steel, round tube Ø 18 x 2 mm, with a 90° bend, pole length 640 mm, fastening clamp for standard rail required.

Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.
Paper roll holder, for table width 1,000 mm.
With mounting hardware, chrome-plated, consisting of two attachment (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two angles, two clamps and a paper roll holder bar (length 615 / 795 / 995 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.

Fixation belt
Length 1,800 mm, width 47 mm, each with two belt locks and mounting brackets for standard rails.

Upholstered insert
To close the cutout at the foot end of the upholstered tabletop, see upholstery colours.

Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables.
Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables.
Sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.

Knee roll, dimensions Ø 180 x 560 mm.
Neck roll, dimensions Ø 140 x 400 mm.
Sewn from synthetic leather, with zipper, see upholstery colours.

Side guard, plastic coated.
Side guard, chrome-plated.
Side guard, made of CrNi steel.
Dimensions approx. 800 x 250 mm (L x H), can be lowered to upholstery height along the fastening clamp. The fastening clamp for standard rail is included.

Shoulder/side supports (pair)
Rod with two 90° bends, made of CrNi steel, round Ø 18 mm, black, electrically conductive padding (Dartex® cover), dimensions approx. 200 x 100 mm, padding thickness approx. 40 mm, height adjustable and rotatable. A pair of fastening clamps for standard rails is required.

Side support
Made of CrNi steel, black, conductive padding (Dartex® cover), removable, dimensions approx. 180 x 80 x 30 mm (H x W x D), with fastening clamp for standard rail.

Stainless steel bowl
With holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible. 

Protractor
Made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.