Accessories for multi-function tables

Arm support
Swivel-mounted, black PU-foamed arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.

Arm and hand surgery table
Made of CrNi steel, height adjustable approx. 700 - 1,135 mm, with floor support, black conductive upholstery, dimensions approx. 650 x 250 mm (L x W), removable, tabletop adjustable using ball joints, with fastening clamp for standard rail.

Göpel leg rests (pair)
With spherical joints, rods with two 90° bends, chrome-plated, round Ø 18 mm, black PU-foam shells, includes the straps sewn from synthetic leather with Velcro closure to secure the legs to the shells.  A pair of fastening clamps for standard rails is required.

Göpel fastening clamps (pair)
For standard rails (dimensions 25 x 10 mm), chrome-plated, for leg holder rods Ø 18 mm. The leg holders can be adjusted in height and tilt using toothed rings and secured with a clamping mechanism.

Foot pedal 
With transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.

Face cutout in the headboard upholstery.
Oval, dimensions approx. 205 x 105 mm (L x W). Retrofitting is not possible.
Upholstered insert for closing the face opening.
Oval, dimensions approx. 200 x 100 mm (L x W). See upholstery colours. 

Hand restraints
Holder Ø 18 mm made of CrNi steel, black webbing strap, dimensions 500 x 50 mm (L x W), with lever clamp, fastening clamp for standard rail required.

Semi-circular roll
Foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.

Semi-circular roll with elastic strap.
Semi-circular roll with Velcro fastener (hook and loop straps).
Foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.

Infusion holder
Made of CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, round tube Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is not possible.

Infusion holder
Made of CrNi steel, infusion rod 1,700 mm long, round tube Ø 18 mm, bottle cross with 4 hooks, with fastening clamp for standard rail.

Instrument table
Made of CrNi steel, dimensions approx. 600 x 400 mm (L x W), side raised edge 15 mm, mounting rod Ø 18 mm, fastening clamp for standard rail required.

Head wedge
Foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours.

Body belt
Dimensions 2,250 x 50 mm (L x W), mounting bolts Ø 18 mm, made of CrNi steel, fixation with Velcro fastener. A pair of fastening clamps for standard rails is required.

Storage basket
Plastic-coated (light grey RAL 7035), for hanging on the legs of the patient transport tables wiht fixed height, dimensions 550 x 290 x 190 mm (W x D x H). Retrofitting is not possible.

Headrest adjustment via gas pressure spring (instead of clamping rod mechanism or grid).
Can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.

Set of castors, Ø 75 mm.
Set of castors, Ø 125 mm.
Four swivel castors, two of which are completely lockable.

Mobile base on retractable castors, castors Ø 75 mm.
Mobile base on retractable castors, castors Ø 125 mm.
Mobility in the form of a retractable castor lifting system, four swivel castors, a foot pedal is located at the head and foot ends, the table can be raised on the castors for transport or lowered back onto its feet. Retrofitting is not possible.

Central locking castor system, double swivel castors Ø 125 mm.
Mobility in the form of a central locking system, all four castors offer excellent rolling properties and are connected to each other by rods, foot pedals are arranged diagonally at the head and foot end, easy to operate and with coloured markings (green = table ready for moving, red = table locked in place). Retrofitting is not possible.

Anesthesia pole
Made of CrNi steel, round tube Ø 18 x 2 mm, with a 90° bend, pole length 640 mm, fastening clamp for standard rail required.

Levelling feet, for square steel tube 30 x 30 mm.
Set (4 pieces) impact caps with levelling feet.

Standard rails (pair), approx. length 400 mm.
Standard rails (pair), approx. length 600 mm.
Standard rails (pair), approx. length 1,000 mm.
Standard rails (pair), approx. length 1,400 mm.
Standard rails (pair), approx. length 1,700 mm.
Made of CrNi steel, dimensions approx. 25 x 10 mm, for mounting on the upholstery frame, approx. 13.5 mm away from the upholstery/upper frame with 2 (or 3) spacers each. Retrofitting is not possible.

Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.
For multi-function examination tables with fixed height, chrome-plated, consisting of two angles, two clamps and a paper roll holder bar (length 615 / 795 mm, Ø 20 x 1 mm), for mounting on the table legs.

Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.
For height-adjustable multi-function examination tables, with mounting hardware, chrome-plated, consisting of two attachment (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two angles, two clamps and a paper roll holder bar (length 615 / 795 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.

Fixation belt
Length 1,800 mm, width 47 mm, each with two belt locks and mounting brackets for standard rails.

Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables.
Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables.
Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.

Ring armrests (pair)
Black, dimensions approx. 270 x 340 x 45 mm (L x W x H), with fastening clamps for standard rails.

Knee roll, dimensions Ø 180 x 560 mm.
Neck roll, dimensions Ø 140 x 400 mm.
Round roll, foam filling, sewn from synthetic leather, with zipper,  see upholstery colours.

Rectoscopy roll
Height-adjustable, dimensions 650 x 65 x 550 mm (W x D x H), holder for mounting clamp round Ø 18 mm, chrome-plated rods, upholstered with synthetic leather, see upholstery colours, for knee elbow position. Retrofitting is not possible.

Side guard, plastic coated.
Side guard, chrome-plated.
Side guard, made of CrNi steel.
Dimensions approx. 800 x 250 mm (L x H), can be inserted into the upholstery/tabletop frame facing upwards and downwards, secured using a handwheel. Retrofitting is not possible.

Side guard, plastic coated.
Side guard, chrome-plated.
Side guard, made of CrNi steel.
Dimensions approx. 800 x 250 mm (L x H), can be lowered to upholstery height along the fastening clamp. The fastening clamp for standard rail is included.

Side guard, plastic coated.
Side guard, chrome-plated.
Side guard, made of CrNi steel.
Dimensions approx. 800 x 250 mm (L x H), permanently connected to the upholstery/tabletop frame, can be lowered to upholstery height using a pivot mechanism, black handwheel with spring-loaded fixing bolts. Retrofitting is not possible.

Shoulder/side supports (pair)
Rod with two 90° bends, made of CrNi steel, round Ø 18 mm, black, electrically conductive padding (Dartex® cover), dimensions approx. 200 x 100 mm, upholstery thickness approx. 40 mm, height adjustable and rotating. A pair of fastening clamps for standard rails is required.

Side support
Made of CrNi steel, black, conductive upholstery (Dartex® conductive cover), removable, dimensions approx. 180 x 80 x 30 mm (H x W x D), with fastening clamp for standard rail.