Accessories for examination chairs

Leg rests (pair)
With plastic shells, rods with a 90° bend, chrome-plated, holder for fixing clamps round Ø 18 mm, with Velcro fasteners for fixing the legs to the leg shells, pair of fastening clamps required for standard rails.

Göpel leg rests (pair)
With spherical joints, rods with two 90° bends, chrome-plated, round Ø 18 mm, black PU-foam shells, includes the straps sewn from synthetic leather with Velcro closure to secure the legs to the shells.  A pair of fastening clamps for standard rails is required.

Göpel fastening clamps (pair)
For standard rails (dimensions 25 x 10 mm), chrome-plated, for leg holder rods Ø 18 mm. The leg holders can be adjusted in height and tilt using toothed rings and secured with a clamping mechanism.

Fastening clamps (pair)
For standard rails (dimensions 25 x 10 mm), chrome-plated, for leg rest holders Ø 18 mm, the leg rests can be secured at the desired height with a clamping handle.

Leg plate, for gynaecological examination chair AGA-PERMO, Article No.: GU-1062/G.
Leg plate, for all other examination chairs except AGA-PROKTO-LIFT, Article No.: PRE-1067/EE.
To insert under the seat section of the examination chairs, chrome-plated insertion guides (square steel tube 25 x 25 x 2 mm), lacquered upholstery frame, cushion dimensions 580 x 350 mm (W x D), thickness 64 mm, upholstered with synthetic leather, see upholstery colours.

Electric backrest adjustment (instead of gas pressure spring)
The maintenance-free and extremely quiet electric drive used is controlled via a foot switch (alternatively - at no extra charge - via a hand switch). Motor connection values: 230V, 50/60 Hz, 1.5A, 350W, IPX4, v=6mm/s, 4,000N. Retrofitting is not possible.

Heel supports (pair)
Rods with a 90° bend and half-round loop, chrome-plated, holder for fixing clamps round Ø 18 mm, pair of fastening clamps (Article No.: BKG-600) required for standard rails.

Footrests (pair)
Slightly curved rod, round tube Ø 30 x 2 mm, holder for round fixing clamp Ø 18 mm, chrome-plated, synthetic leather cover with Velcro fastener, with adjustable footrests and non-slip coating, pair of fastening clamps (Article No.: BKG-600) required for standard rails.

Göpel leg holders (pair)
With ball joints, rods (dimensions round tube Ø 30 x 2 mm) with two bends, holder for fastening clamps round Ø 18 mm, chrome-plated, synthetic leather cover with Velcro fastener, black PU-foamed pads, includes the straps sewn from synthetic leather with Velcro fasteners for fixing the legs to the leg shells, pair of fastening clamps (Article No.: BKG-600) required for standard rails.

Semi-circular roll
Foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.

Semi-circular roll with elastic strap.
Semi-circular roll with Velcro fastener (hook and loop straps).
Foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.

Infusion holder
Made of stainless steel, infusion pole 1,700 mm long, bottle cross with 4 hooks, includes a fastening clamp for standard rail.

Colposcope holder, for Leisegang and Kaps systems.
Colposcope holder, for Zeiss and Olympus systems.
For mounting onto the front of the examination chair column, lacquered frame, chrome-plated colposcope holder tube.

Head wedge
Foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours.

Knee plate
To insert under the seat section of examination chairs, chrome-plated insertion guides (square steel tube 25 x 25 x 2 mm), lacquered upholstery frame, cushion dimensions 520 x 170 mm (W x D), thickness 64 mm, upholstered with synthetic leather, see upholstery colours.

Gyroscopic sink
Stainless steel bowl 330 x 300 x 100 mm (W x D x H), inlet hose Ø 3/8″, length 1500 mm, chrome-plated universal valve 1¼″ x Ø 60 mm (including plug), with bottle siphon 1¼″ x Ø 32 mm, drain spiral hose, Ø 32 mm (inside), length 1600 mm, mini ball valve, flushing nozzle ½″ and tap ½″ with aerator and backflow prevention (in accordance with DIN EN 1717). Retrofitting is not possible.

Mobile base with central locking castor system
Welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.

Standard rails (pair), approx. length 400 mm.
Standard rails (pair), approx. length 600 mm.
Dimensions approx. 25 x 10 mm, made of stainless steel, for mounting on the back section frame, approx. 13.5 mm away from the upholstered frame with 2 spacers each. This allows other accessory components from the operating tables and multifunctional tables range to be attached. Retrofitting is not possible.

Ring armrests (pair)
Made of plastic, black, dimensions 270 x 340 x 45 mm (H x W x D), with handwheels (M 10) for fixing to the standard rails.

Knee roll, dimensions Ø 180 x 560 mm.
Neck roll, dimensions Ø 140 x 400 mm.
Round roll, foam filling, sewn from synthetic leather, with zipper,  see upholstery colours.

Rectoscopy roll
Height-adjustable, dimensions 740 x 65 x 550 mm (W x D x H), holder for fastening clamp round Ø 18 mm, chrome-plated rods, upholstered with synthetic leather, see upholstery colours.